Operation and maintenance manual
www.changlin.com.cn
41/167
pages
Fill the engine with clean oil to the proper level.
Four Cylinder Six Cylinder
Pan Capacity 9-5 Liters 14.2 Liters
[10U.S. Qts] [15U.S. Qts]
Total System 10.9 Liters 16.3 Liters
Capacity [11.5 U.S. Qts] [17.2 U.S. Qts]
NOTE: Capacities assume standard pan. Total system
assumes standard pan plus filter.
Some 6B applications use a reduced capacity pan 10.4 Liters
[11 U.S. Qts] and some have increased capacity of 16 liters
[17 U.S. Qts]. Fill quantities must be adjusted accordingly.
Operate the engine at idle to inspect for leaks at the filters and
the drain plug.
Stop the engine. Wait approximately 5 minutes to
let the oil drain from the upper parts of the engine.
Check the oil level again.
Add oil as necessary to bring the oil level to the "H"
(High) mark on the dipstick.