Operation and maintenance manual

www.changlin.com.cn


34/167
pages

GeneralInformation
Preventative maintenance begins with day-to-day awareness of the condition of the engine and its
systems. Before starting the engine, check the oil and coolant levels. Look for:
 Leaks
 Loose or damaged parts
 Worn or damaged belts
 Any change in engine appearance
Fuel‐WaterSeparator
Draining
Draing the water and sediment from the separator
daily. Shut off the engine. Use your hand to open the
drain valve. Turn the valve counterclockwise
approximately 1 1/2-to 2 turns until draining occurs.
Drain the filter sump of water until clear fuel is
visible.
Caution: Do not overtighten the valve.
Overtightening can damage the threads.
Turn the valve clockwise to close the drain valve.
OilLevel
Check
Never operate the engine with the oil level below the
“L” (Low) mark or above the “H” (High) mark. Wait at
least 5 minutes after shutting off the engine to
check the oil. This allows time for the oil to drain to
the oil pan.
NOTE: The engine must be level when checking the
oil level to make sure the measurement is correct.
Low Mark To High Mark Oil Capacity
4 Cylinder-0.95 Liter [1.0 U.S. Quart]
6 Cylinder-1.89 Liter [2.0 U.S. Quart]