Operation and maintenance manual

www.changlin.com.cn


165/167
pages

Sealants
Use the sealants listed below or sealants containing equivalent properties.
Description Sealing Method
1. Pipe Plugs Precoated teflon or pipe sealer.
2. Cup Plugs Loctite 277 or 11,264
3. O-Rings No sealant required.
4. Rear Camshaft Expansion Plug Precoated or Loctite 59,241 liquid teflon.
5. Fuel Pump Studs Loctite 609.
6. Turbo Drain in Block Loctite 277 or 11,264
7. Front Seal in Gear Cover Loctite 277 or 11,264
8. Rear Seal in Rear Cover No sealant.
9. Oil Pan at T-Joint 3-Bond 1207C (P/N 3823494)