Operation and maintenance manual
www.changlin.com.cn
146/167
pages
15 mm
Install the exhaust manifold and new gaskets.
Torque Value: 43 N*m [32 ft-lb]
Follow the tightening sequence shown in the
illustration Then, follow the same sequence and
tighten the capscrews again to the same torque
values.
Install the parts previously removed. Operate the
engine and check for leaks.
LubricatingSystemRepair
Lubricating System Repair Summary
Component To Be Replaced
Tools
Preparatory Steps
Oil Pressure Regulator Valve and/or
Spring
Ratchet, 22 mm Socket and Torque
Wrench
Clean debris
Oil Cooler Element and/ or Gaskets 16 mm Wrench, Ratchet, 10 mm
Socket and Torque Wrench
Drain Coolant, Remove
the oil filter.
OilPressureRegulator,ValveandSpringReplacement.
Preparatory Steps:
• Clean debris.