Manualshelf

Operation and maintenance manual

ManualsBrandsHyundai ManualsOtherOperation and Maintenance Manual C series Engine for HG130 / HG170
111112113114115116117118119120
www.changlin.com.cn
113/167
pages
10 mm
The special washer on the Bosch injection pump must
be removed so the lockscrew can be tightened against
the drive shaft.
Torque Value: 30 N*m [22 ft-lb]
22 mm
Remove the gear cover access cap.
Remove the nut and washer from the fuel pump shaft.
75 mm T-Bar Puller
Pull the fuel pump drive gear loose from the shaft.
Caution: Do not remove the control lever. The lever is
indexed to shaft during pump calibration. Removal of the
lever will alter the fuel pump calibration and effect engine
performance.