Operation and maintenance manual
www.changlin.com.cn
106/167
pages
Assemble the injector and new copper washer.
Use only one copper washer.
Service Tip: A light coat of clean 15W40 engine oil
between the washer and injector can help to keep
the washer from falling during installation.
24 mm
Install the Injectors
The protrusion on the side of the nozzle fits into a
notch in the head to orient the injector.
Tighten the injector nozzle nuts.
Torque Value: 60 N-m [44 ft-lb]
10 mm
Install the fuel drain manifold.
Torque Value: 9 N-m [7 ft-lb]
17 mm
Install the high pressure fuel lines.
Torque Value: 30N• m [22ft-lb]