Operation and maintenance manual
www.changlin.com.cn
103/167
pages
NOTE: Use new seals and sealing washers.
Assemble the drain line and fuel drain manifold in the
reverse order of removal.
Torque Value:
(Banjo fitting screw) 15 N• m [11 ft-lb]
(Banjo fitting) 9 N• m [7 ft-lb]
(Clamp screw) 24N• m [18 ft-lb]
InjectionPumpSupplyLine‐Replacement
17 mm
Remove the bleed screw banjo fitting.
14 mm, 16 mm, 17 mm
Remove the supply line (Bosch Injection Pump).
Replace the seals (1) in the fittings if the line is
disassembled.
14,16,19 and 24 mm
The Lucas CAV pump has two fittings for the supply
line.
Replace the seals in the fittings if the line is
disassembled. Replace banjo fitting sealing washers (1)
and ferrules (2) each time they are removed.
Torque Value: 32 N*m [24 ft-lb]