Operation Manual

Page 32
Never touch the rotating nylon cord or blade.
Always stop the engine and unplug the spark plug before doing any repairs or maintenance.
Check and maintain fuel level regularly, and maintain the fuel/oil mix to the correct ratio.
Frequently check the brush cutter and make sure that all grass deposits are removed from the
trimmer head and/or blade
Check the blade, in order to obtain a good cut, the blade should always be sharp and well balanced.
At regular intervals, check the tightness of all nuts, bolts and screws.
If the blade hits an obstacle check for damage and if the machine vibrates badly stop the lawnmower
and take it to a service dealer.
6.1. Air filter.
Never let the engine run without the air filter. A dirty air filter presses on the engine performance,
increases fuel consumption and makes it difficult to start. If you notice a loss of engine power.
6.1.1. Push clip (1) down and pull filter cover (2) away from machine, take care to release lower clips
(3).
6.1.2. Remove the filter (4) by pressing clip (5) and lifting filter clear.
6.1.3. Wash with soap and water. Never use petrol or benzene!
6.1.4. Allow the filter to air dry. To replace the filter reverse the above process.