Operation Manual

Page 30
Make sure the chain and sprocket are correctly
adjusted before operating the Pole chainsaw.
Never attempt chain adjustment with the
engine running!
Always make sure the cutting attachments are
properly installed and firmly tightened before
operation.
Never use a cracked or warped guide bar,
replace it with a serviceable one and make
sure it fits properly.
If a saw blade should bind fast in a cut shut off
the engine immediately. Push the branch or
tree to ease the bind and free the blade.
DO NOT operate the Pole chainsaw/Hedge
trimmer with the muffler removed.
When cutting a limb that is under tension, you
must be alert for spring back so that you will
not be struck by the moving limb.
Always stop the engine immediately and check
for damage if you strike a foreign object or if
the machine becomes tangled.
DO NOT operate with broken or damaged
equipment.
DO NOT make unauthorized modifications or
substitutions to the guide bar or chain.
NEVER allow the engine to run at high RPM
without a load. Doing so could damage the
engine.
Keep the Pole chainsaw/Hedge trimmer as
clean as possible. Keep it free of loose
vegetation, mud etc.