Operation Manual

Page 27
b.
5.1. Before starting work.
5.1.1. YOU MUST check the work area for
obstacles such as stones, metal rods or other
objects. If these cannot be removed, mark
these positions, so you can avoid contact with
the blade and objects. Overhead power lines
can be caught on the blade head if machine is
swirled in the air.
5.2. Accessories.
5.2.1. Make sure that your product is only
equipped with original accessories. Only use
the machine with original parts which are
specified by the manufacturer. The use of any
other accessories may cause injury to the user
and damage to the machine.
5.3. Wearing the shoulder harness.
When you use this machine always wear the
provided harness.
Make sure that the machine is securely
hooked onto the strap.
If you do not, you will not be able to control
the machine safely.
This may result in injury to yourself or other
people.
Never use a harness with any type of defect
especially with a defective quick release
mechanism.
a.
c. 1 = Protector Shield and machine hook.
d.
e. 1 = Quick release Harness buckle.
f. The shoulder strap is fitted with a quick
release device (see image) fitted. You can
remove the shoulder strap quickly by pulling
the quick release device.
5.4. Trimming techniques.
5. USING THE MACHINE