User's Manual

Report No: BWS-04-RF-0002
FCC ID : QUPSAVERCALL-3000
Date of Test : February 04, 2004
Trouble Shooting (Q & A)
Q : What if I forget the password?
A : 1. Please turn off main unit.
2. Please turn on main unit with pressing SOS button. Then you will enter
initial setting mode after ‘Beep’.
Q : If I don’t want to use some sensors such as Motion Detector during somebody is
in.
A : 1. Enter Alarm home mode.
2. You can’t use some sensors that are only installed as alarm away mode.
Q : Why can’t I receive phone calls?
A : 1. Check that the programmed telephone number is correct or not.
2. Check that the telephone line is securely connected in the “LINE” port.
Q: If motion dectector doesn’t work
A: 1. Please change the the sensor’s location and direction to avoid detecing pets.
2. Check that the seonsor is in windy place (ex : around air conditioner, near by window)
or sunny place .
Q: If remote controller doesn’t work
A: 1. Please turn off the power, and turn on the power after five seconds.
Then operate remote controller.
2. Check remote controller light by pressing button. If light doesn’t work, please change
battery.
Hyun Joung System Co., Ltd
Wireless Security System SAVERCALL-3000