User's Manual

Report No: BWS-04-RF-0002
FCC ID : QUPSAVERCALL-3000
Date of Test : February 04, 2004
User Function Voice Guide Press
Converse via 2-way speakerphone “To speak, no. 1” 1
Listen only, mute speakerphone at
the alarmed zone
“To wiretap, no. 2.” 2
Want to start Siren alarm “To start Siren, no. 3.” 3
To enter wait mode “To enter the wait mode, no. 4.” 4
To enter alarm away mode “To enter alarm away mode, no. 5” 5
To enter alarm home mode “To enter alarm home mode, no. 6” 6
Hear Voice guidance again “To hear repeatedly, press no. 0.” 0
8. How to use telephone by main unit.
 Press [0☎]Key in the main unit
K E Y [0☎]
Phone number L C
D
=
 If you want to increase volume, please press [#▲]
If you want to decrease volume, please press [▼*]
 To hang up the phone, please press WAIT/SET.
 When you receive a call, please press [0☎]Key.
9. How to use Siren by main unit.
 Savercall-3000 supports inner siren & siren with wire.
 If you select “remote controller sound” in the additional menu, you will hear whistle sound
from siren when you activate remote controller.
ⓐ Wait mode → Press “alarm” key → alarm away mode : 1time of whistle sound
ⓑ Alarm away mode → Press “alarm” key → alarm home mode : 2times of whistle
sound
ⓒ Alarm home mode → Press “alarm” key → alarm away mode : 1time of whistle
sound
ⓓ All mode without set mode → Press “off” key → wait mode : 3times of whistle
sound
Hyun Joung System Co., Ltd
Wireless Security System SAVERCALL-3000