User's Manual

Report No: BWS-04-RF-0002
FCC ID : QUPSAVERCALL-3000
Date of Test : February 04, 2004
To select user messages
Record address
L C D
1=ok 2=change
VOICE Press no.1 for selection, press no.2 for change.
Please press no.1 key for selection, press no.2 key for change
To input alarm delay time [4=Delaying alarm]
Silent Activation delay while you enter the alarmed zone
K E Y
4
Delay time [15]
L C D
1=ok 2=change
VOICE
Alarm delay time,15seconds, Press no.1 for selection, press no.2 for
change.
The default time is 15seconds. You can set from 1sec. to 99sec.
Please press 1key for selection, press 2key for change.
When you select “change” of alarm delay time
Delay time
L C D
=
VOICE Please input the alarm delay time. Please press set key after finishing.
If you set “alarm delay time” as 30seconds
K E Y
3 + 0 + WAIT/SET
Delay time
L C D
=30
VOICE 3, 0, The data is entered.
“4” To input alarm delay time [4=Delaying alarm]
From the next step, registration will be same as above instructions.
Hyun Joung System Co., Ltd
Wireless Security System SAVERCALL-3000