User's Manual

Report No: BWS-04-RF-0002
FCC ID : QUPSAVERCALL-3000
Date of Test : February 04, 2004
To confirm sensor you assigned.
Activate
L C D
Sensor
VOICE Please activate sensor and remote controller.
If you assign “Motion detector” as sensor no.3
Motion detector 03
L C D
1=ok 2=change
VOICE Remote controller, No.3, Press no.1 for selection, press no.2 for change.
If you select the change (no.2), you will see the below message.
(1->30)Sensor No
L C
D
=
VOICE Please input sensor number. Please press set key after finishing.
“3” Leave user message [3=recording]
To record alarm notification message [3=Recording]
Speak slowly & clearly while recording (Max. 30 seconds)
K E Y
3 + [Message and address recording] + WAIT/SET
Record address
L C D
Press any key
VOICE Please leave your message after the beep and then press set key.
Then user message will be revived as follows:
Record address
L C D
Confirm address
VOICE
Hyun Joung System Co., Ltd
Wireless Security System SAVERCALL-3000