User's Manual

Report No: BWS-04-RF-0002
FCC ID : QUPSAVERCALL-3000
Date of Test : February 04, 2004
<Main Menu>
“1” To set password [1=ID]
Create & SET/WAIT a 4-digit Password(=ID Number) that will be needed for programming, editing or
accessing the system through the keypad on Control Panel or Remotely by Telephone.
K E Y
1
ID
L C D
=
VOICE Please input the password. Please press set key after finishing.
Example: If you input password “1 2 3 4”
K E Y
1 + 2 + 3 + 4 + WAIT/SET
ID
L C D
=1234
VOICE 1,2,3,4, The data is entered.
* Please note that password should be 4digits.
To Confirm the password you inputted
ID=1234
L C D
1=ok 2=change
VOICE Password 1 2 3 4, Press no.1 for selection, press no.2 for change.
Please press 1key for selection or press 2key for change.
“2” sensor(Remote controller)registration. [2=sensor memory]
K E Y
2
Activate
L C D
Sensor
VOICE Please activate sensor and remote controller.
Hyun Joung System Co., Ltd
Wireless Security System SAVERCALL-3000