User's Manual
Table Of Contents
- 1 Notes on the document
- 2 Safety regulations
- 3 Product description
- 3.1 Constituents
- 3.1.1 Voltage supply and alarming system
- 3.1.1.1 Terminal block
- 3.1.1.2 Expansion for VAC voltage supply (VAC voltage supply unit)
- 3.1.1.3 Alarm system expansion
- 3.1.1.4 SC200 - optional (VAC or alarm system expansion)
- 3.1.1.5 Alarm input/output module - optional (VAC or alarm system expansion)
- 3.1.1.6 Rectifier module - optional (VAC expansion)
- 3.1.2 E1 connection board
- 3.1.3 Redundancy package with LAN Routing Unit (LRU)
- 3.1.4 On/off switch
- 3.1.5 TIB transceiver module (TETRA Indoor Base)
- 3.1.6 Antenna Coupling System (ACS)
- 3.1.7 Fan unit
- 3.1.8 Cavity coupler (only for the Cavity variant)
- 3.1.9 Redundancy options for the DIB-500 R4.1 or the Base Station Function (BSF)
- 3.1.1 Voltage supply and alarming system
- 3.2 Interfaces
- 3.3 Wiring diagrams
- 3.4 Scope of delivery
- 3.1 Constituents
- 4 Transport and storage
- 5 Setup and commissioning
- 5.1 Safety measures and prerequisites
- 5.2 Tools, aids and materials
- 5.3 Installing equipment racks
- 5.4 Removing the top cover of the mounting frame
- 5.5 Connecting equipment racks (as of 5 carriers)
- 5.6 Connection to the electrical system
- 5.7 Connecting Ethernet cables
- 5.8 Installing the GPS antenna
- 5.9 Installing the GPS protector - optional
- 5.10 Connecting antennas
- 5.11 Connecting external alarm sensors (LSA+)
- 5.12 Connecting external alarms - optional, with VAC or alerting expansion
- 5.13 Mounting the top cover of the equipment rack
- 5.14 Switching on the voltage source
- 5.15 Switching on the DIB-500 R4.1
- 6 Configuration
- 6.1 Configuring the software
- 6.1.1 Work equipment
- 6.1.2 Preparatory measures
- 6.1.3 Deleting the ARP buffer
- 6.1.4 Configuring and generating network configurations via the NMC-515 ConfigurationManager
- 6.1.5 Creating the download repository
- 6.1.6 Adapting IP addresses (with more than one transceiver module)
- 6.1.7 Performing an initial download via NMC-522 DownloadManager
- 6.2 Adjusting a cavity coupler - optional (cavity variant only)
- 6.3 Concluding tasks
- 6.1 Configuring the software
- 7 Function tests and operating surveillance
- 8 Service interruption
- 9 Recommissioning
- 10 Maintenance
- 11 Component replacement
- 11.1 Safety measures and prerequisites
- 11.2 Overview of replacement components and tools, aids and materials
- 11.2.1 Replacing the TIB transceiver module (tools and aids)
- 11.2.2 Replacing the ACS (tools and aids)
- 11.2.3 Replacing components of the fan unit (tools, aids and materials)
- 11.2.4 Replacing the LRU (tools and aids)
- 11.2.5 Replacing the top hat rail power supply unit (tools and aids)
- 11.2.6 Replacing components of the mounting frame/the voltage supply unit (tools, aids and materials)
- 11.2.7 Replacing cavity couplers (tools and aids)
- 11.2.8 Replacing the GPS protector (tools and aids)
- 11.3 Replacing the TIB
- 11.4 Replacing the ACS
- 11.5 Replacing fan unit constituents
- 11.6 Replacing the LRU - optional (redundancy package)
- 11.7 Replacing the top hat rail - optional (redundancy package)
- 11.8 Replacing components of the VAC and alarm system expansion - optional
- 11.9 Replacing cavity couplers - optional (cavity variants only)
- 11.10 Replacing the GPS protector - optional
Installation, Operation and Service Manual 90DIB500R41IM_FCC02 – 99.1 XI
DIB-500 R4.1
11.4 Replacing the ACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
11.4.1 Removing the ACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
11.4.2 Installing the ACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
11.5 Replacing fan unit constituents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
11.5.1 Replacing the air filter pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
11.5.1.1 Removing the air filter pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
11.5.1.2 Installing the air filter pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
11.5.2 Replacing the fan subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
11.5.2.1 Removing the fan subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
11.5.2.2 Installing the fan subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
11.6 Replacing the LRU – optional (redundancy package) . . . . . . . . . . . . . . 188
11.6.1 Removing the LRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
11.6.2 Inserting the LRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
11.7 Replacing the top hat rail – optional (redundancy package) . . . . . . . . . 190
11.7.1 Removing the top hat rail power supply unit . . . . . . . . . . . . . . . . . . . . . . . . 191
11.7.2 Installing the top hat rail power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . 192
11.8 Replacing components of the VAC and alarm system expansion –
optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
11.8.1 Replacing rectifier modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
11.8.1.1 Uninstalling rectifier modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
11.8.1.2 Installing rectifier modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
11.8.2 Replacing the mounting frame and the SC200 . . . . . . . . . . . . . . . . . . . . . . 196
11.8.2.1 Preparatory measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Disconnecting external alarms (via alarm input/output module) . . . . . . . . . 198
Removing connections of the SC200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Removing Plugs with Earthing Contact – optional (only for VAC expansion) 200
11.8.2.2 Replacing the mounting frame and the SC200 . . . . . . . . . . . . . . . . . . . . . . 201