User's Manual

Site Requirements 90DIB500R41SR_FCC02 – 99.1 7
DIB-500 R4.1 Notes on the document
Objectives of the document
1 Notes on the document
This chapter provides information on using the document. It also provides information
on the requirements for using the product.
1.1 Objectives of the document
The present document describes the site requirements of all the available variants of
the product. All the requirements described in the present document must be met to
ensure intended use of the product at your site / in your service room.
The service room must have been equipped as required before the product is installed
in this room.
The present document describes the following site requirements:
| Requirements for the Service Room
| Electrical System Requirements
Unintended Use
If the location / service room of the product does not meet the requirements detailed
below, the product is not used as intended. The plant operator is responsible for the
resulting impairment of the operation or damage to the product. For this reason, comply
with all the requirements specified below.
1.2 Intended audience of the document
The present document reverts to all the persons, who
| determine, equip and prepare the installation site of the product.
| operate the product.
Use within the scope of site inspection/acceptance
The present document can be used as a basis for the site inspection and acceptance.
Each person commissioned with performing the tasks mentioned above with or on the
system must have read and understood the present document and the associated
accompanying documentation.