User's Manual

Installation, Operation and Service Manual 90DIB500R41IM_FCC02 – 99.1 141
DIB-500 R4.1 Configuration
Configuring the software
17. Enter the corresponding IP address of the IntelPC, refer to Table 6.8 on page 135.
18. Enter the following command to change to the main menu:
Esc
19. Enter the following command and confirm your entry with the Enter key:
:wq
➥ The changes will be saved and the configuration file closed.
20. Enter the following command to open the corresponding configuration file:
vi /etc/exports
➥ The "exports" configuration file is opened. The following output is an example:
# ================================================================
# ACCESSNET-T Configuration File
#
# Network : cta
# Description : cta
# Package Version : 7.0
# Network Element : bs01-002 (DIB1_12)
# Software Component : aeos-intel_1 (AEOS Intel)
# Software Version :
# Configuration Version : 1001281502
# Generated by : NMC-515 ConfigurationManager 03.01.00
# Date/Time : 28.01.2010 15:02:32 CET
# ================================================================
/ 10.101.101.49/
255.255.255.224(rw,no_root_squash,no_subtree_check)
/linuxppc 10.101.101.49/
255.255.255.224(rw,no_root_squash,no_subtree_check)
intelpc-1-1-1-1-bs01-002:~ #
Adaptation of the network mask not required
The network mask need not be adapted (here "255.255.255.224").
21. Navigate to the IP address of the "/" (here: "10.101.101.49") entry with the arrow
keys.
22. Enter the following command to delete the corresponding line:
x
23. Enter the following command to insert a corresponding figure:
I
24. Enter the corresponding IP address of the PowerPC, refer to Table 6.9 on
page 138.
25. Proceed analogously for the IP address of the "/linuxppc" entry.
26. Enter the following command to change to the main menu:
Esc (Escape)
27. Type in the following command: