Preface Thanks for your favor in our product. To derive optimum performance from the product, please read this manual carefully before use.
Disclaimer Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
1. Items in the Package There two kinds of delivery forms: one is that the package will contain all the items listed below; Please unpack carefully and make sure all the items are received per your purchase. If any item is missing or damaged, please contact your dealer. No. Name Qty. 1 Wireless Remote Speaker Microphone 1 2 Vehicle Power Adapter 1 3 Vehicle Charger 1 4 Screws 2 5 Owner’s Manual 1 Note Wireless ring PTT mentioned in this manual is an optional accessory.
2. Product Overview This exquisite, easy-to-carry and low-powered mobile radio wireless kit is applicable to MD65X/MD78X conventional mobile radios with firmware version of V7.00.10.000 and above. 2.1 Product Controls 2.1.1 Wireless Remote Speaker Microphone No. Part Name No.
No. Part Name No. Part Name 4 Microphone 10 Female Buckle 5 LCD Display 11 Charging Pin 12 USB Port Keypad Area (including Left, Right, Power On/Off/Switch Key, 6 P1 and P2) 2.1.2 Programmable Keys For enhanced convenience, you may request your dealer to program the TK ( ) P1 and P2 as shortcuts to certain functions. Caution The TK key is programmed with emergency feature by default (short press: Emergency On; long press: Emergency Off). It is programmable by your dealer. 2.
LED Indication Wireless Remote Speaker Microphone Status The LED Indicator glows blue. / The LED indicator glows green. Fully charged 2.
3. Before Use 3.1 Installing Wireless Audio Adapter Step 1 Make the indication point face upward, adjust the lock knob and fix the wireless audio adapter into the remote speaker microphone connector properly. Step 2 Rotate the lock knob clockwise to fasten it. 3.2 Installing Vehicle Charger Install the vehicle charger on a suitable place on the vehicle panel, then use two screws to fix it. See the figure below.
3.3 Installing Wireless Remote Speaker Microphone Insert the male buckle of the wireless remote speaker microphone into the female buckle of the vehicle charger, and then fix the wireless remote speaker microphone against the vehicle charger. See the figure below. Note To remove the wireless remote speaker microphone, rotate it clockwise or counterclockwise for an angle equal to or larger than 45°. 3.
¾ Remove the vehicle power adapter when the product is fully charged. Over charged may shorten the life span of the battery. Charge the wireless remote speaker microphone before use. During charging, the LED indicator of the wireless remote speaker microphone glows red; when it is fully charged, the LED indicator glows green.
4. Basic Operations 4.1 Powering On/Off The wireless remote speaker microphone will emit a tone upon power-on and power-off. Power On z Wireless remote speaker microphone: Long press the Power On/Off/Switch Key. The LED indicator flashes after the wireless devices are powered on. Please refer to 2.2 LED Indicator for details. Power Off z Wireless remote speaker microphone: Long press the Power On/Off/Switch Key until the LCD displays “Select Power Off”, then short press the Power On/Off/Switch Key.
Step 4 Long press the PTT/Multi-functional Key of the wireless audio adapter and the Power On/Off/Switch Key of the wireless remote speaker microphone respectively until the LED indicator flashes red and blue alternatively to enter pairing mode. After successful pairing, the wireless remote speaker microphone will be connected to the wireless audio adapter automatically.
Step 4 Long press the PTT/Multi-functional key of the wireless audio adapter until the LED indicator flashes red and blue alternatively, then short press the PTT/Multi-functional key for three times until the LED indicator glows blue to enter wireless ring PTT pairing mode. Step 5 Long press the + key and – key of the wireless ring PTT until the LED indicator glows blue to enter pairing mode. After successful pairing, the wireless ring PTT will be connected to the wireless audio adapter automatically.
5. Troubleshooting Phenomena Analysis Solution Make sure the device is within communication range and pair again. (Max communication Fail to reconnect The device may be out of distance is 10 meters when there is no automatically. communication range. obstacle. Communication distance will be shortened when there is obstacle.) Noise in communication. The device may be out of Make sure the device is within communication communication range. range.
6. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care z Do not pierce or scrape the product. z Keep the product far away from substances that can corrode the circuit. z Cover the charging connector after charging. Product Cleaning Caution Turn of the product before cleaning. z Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.
