User's Manual

Caution
If this feature is enabled, the radio will consume more power.
After the BT is turned on, the radio will wait for connection. If no device is
connected during a period of time, the radio will enter the dormant state and cannot
be searched by other BT devices. This saves power and ensures the connection
security. To enable the radio to be always searched by other BT devices when the
radio is on, go to
Menu
>
Accessories
>
BT
>
Always On
.
Turning On the Indoor Positioning
Description
The BT Positioning feature allows the radio to obtain the position information after
the indoor positioning base station calculates the approximate location of the radio
according to its returned signal strength. This feature is applicable to indoor
scenarios where the GPS feature cannot be used because the signal is shielded by
buildings.
Operation
1. Turn on the BT.
2. Go to
Menu
>
Accessories
>
BT > Indoor Positioning
.