PD48X DIGITAL PORTABLE RADIO QUICK REFERENCE GUIDE RADIO PD48X DIGITAL PORTABLE QUICK REFERENCE GUIDE Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China,P.R.
Product Overview For enhanced convenience, you can request your dealer to program TK, SK1, and SK2 as shortcuts to assignable radio features. For details, consult your dealer.
Basic Operations LED Indicator Charging the Battery Charging Status Flashes red No battery is placed on / slowly the charger. Turning the Radio On or Off l Read the Safety Information Booklet before charging. l Use the approved charger to charge the battery. l The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA). Before initial use, charge the battery.
Locking or Unlocking the Keypad l To enter special characters, press numeric mode. When the keypad is not in use, it is recommended that you lock it to avoid l To enter a space, press in alphabetic mode or in in alphabetic mode. unintended operations. Selecting a Zone To lock or unlock the keypad, do either of the following: In conventional mode, a zone is a group of channels within the same operational area. The radio supports up to 16 zones, each of which contains up to 16 channels.
Status Indications Icon Radio Status l A private call is in progress. LCD Icons l A private contact is on the contact list. Icon Radio Status l A group call is in progress. DM Direct Mode: The radio transmits and receives directly. l A group contact is on the contact list. RM Repeater Mode: The radio transmits and receives through a repeater. l An all call is in progress. l An all call contact is on the contact list. The number of bars indicates the power left in the battery.
l On the home screen, press Call Services When you are speaking during a call, keep the microphone about 2.5 cm to 5 cm away from your mouth. This ensures optimal voice quality on the receiving radio. l Go to Menu > Call Logs > Outgoing/Incoming/Missed > Outgoing List / Incoming List / Missed List, select the private contact, and then press the PTT key.
An all call ends when the calling party releases the PTT key. Emergency Call Call on Analog Channel In case of an emergency, you can initiate an emergency call to seek help from your companion or the control center. With the highest priority, the emergency call can be initiated even when the radio is transmitting or receiving. In conventional mode, you can initiate or receive a call on an analog channel with or without signaling.
3. Press the OK/Menu key. Sending a Message The product supports Bluetooth EDR, BDR and BLE 1M function Sending a Text Message To send a text message, do as follows: For details on more features and operations, please visit our website at: http://www.hytera.com, or scan the QR code to download the User Manual. 1. Go to Menu > Message > New Msg, and then type the text using the keypad. 2. Press the OK/Menu key, and then select Send. 3.
FCC Statement RF Exposure Compliance and Control This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
levels which exceed the FCC's occupational/controlled environmental RF exposure limits. · Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. · Contact your local dealer for the product's optional accessories.
L'exposition aux champs rf de conformité et de contrôle d'orientations et instructions Pour contrôler l'exposition et s'assurer de la conformité avec les limites d'exposition professionnelle / environnement contrôlé, toujours respecter les procédures suivantes. Lignes directrices: Ne pas enlever l'étiquette de l'appareil d'exposition aux radiofréquences. Sensibilisation des utilisateurs instructions devraient accompagner dispositif lorsque transférés à d'autres utilisateurs.
Les essais SAR sont effectués à l’aide de positions d’exploitation normalisées acceptées par la FCC/ISEDC avec l’appareil transmettant à son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau de puissance certifié le plus élevé, le niveau réel de R-S de l’appareil pendant son fonctionnement peut être bien inférieur à la valeur maximale.
