User's Manual

5
3.2 Attaching the Battery
To remove the battery, make sure that the radio is turned off, and then slide the
battery latch upwards to unlock the battery.
3.3 Attaching the Antenna
Do not hold the radio by the antenna and swing it. This may affect the antenna
performance and shorten the life span of the antenna.
3.4 Attaching the Belt Clip
1. Use a Phillips screwdriver to turn the screws counter-clockwise on the back of the
radio and remove them.
2. Align the screw holes in the belt clip and on the back of radio.
3. Put the screw back in place, and then use the screwdriver to tighten them.