Users Manual

3
LED Indicator Alert Tone Battery Power
Glows green Three beeps High
Glows orange Two beeps Medium
Glows red One beep Low
Glows red Low battery tone
Below the low battery threshold.
Recharge or replace the battery.
Checking the Battery Power
To check the battery power, press the preprogrammed Battery Power
Indicator key. The following table lists the battery power indications.
Selecting a Zone
A zone is a group of channels within the same operational area. The radio
supports up to 3 zones, each of which contains up to 16 channels.
To select a zone, press the preprogrammed Zone Up or Zone Down key.
Selecting a Channel
To select a channel, rotate the Channel Selector knob.
If the Channel Notify feature is enabled, the radio automatically announces
the current channel upon power-on and channel change.
Call Services
Call on Digital Channel
You can initiate or receive the following types of calls on a digital channel:
•
Private call: a call from an individual user to another individual user.
•
Group call: a call from an individual user in a group to all the other
members in the group.
•
All call (enabled by your dealer): a call from an individual user to all other
users on the current channel.
Initiating a Call
You can initiate a call in either of the following ways:
On the home screen, press and hold the PTT key to initiate a private/group/all
call to the preset contact on the channel.
If the One Touch Call feature is configured by your dealer, press the
preprogrammed One Touch Call key, and then press the PTT key to initiate a
call to a private or group contact.
Receiving and Responding to a Call
You can receive a call without any operation.
To respond to a call, press and hold the PTT key within the preset time.
Ending a Call
•
A private or group call automatically ends when the call hang time expires.
•
An all call ends when the calling party releases the PTT key.