How-To Guide

13
5. Radio A can receive the call without any operation. When receiving, the LED indicator glows
green and the radio displays the icon
.
Radio A can hold down the PTT key to talk when the LED indicator glows orange and the radio
displays the icon .
 Contact List or Call Log
1.
Radio A and Radio B select the same digital channel.
2.
Radio A accesses the contact list via menu “Contact -> Contact List”, “Contact -> Favorite Contact”
or “Call Log -> Outgoing/Incoming/Missed”.
3.
Radio A presses the Up or Down key to select Radio B.
4.
Radio A holds down the PTT key to initiate a call.
5. By holding down the PTT key, Radio A can talk to the microphone when the LED indicator
glows red and the radio displays the icon
.
6. Radio B can receive the call without any operation. When receiving, the LED indicator glows
green and the radio displays the icon .
Radio B can hold down the PTT key to talk when the LED indicator glows orange and the radio
displays the icon .
If Radio B does not respond it, the radio will display appropriate indications.
7. Radio A can receive the call without any operation. When receiving, the LED indicator glows
green and the radio displays the icon
.
Radio A can hold down the PTT key to talk when the LED indicator glows orange and the radio
displays the icon .
Note:
The duration of
LED indicator glowing orange (Call Hang Time) is preset by your dealer. The call will end
if neither party talks before this duration expires.
7.2
Calling on Analog Channel (No Signaling)
On the analog channel without signaling, the calling operations are the same as that on the digital channel.
The difference is that the called parties are all the users on the channel, rather than the preset contact for the
channel.