Quick Reference Guide

The handset is available only for the duplex radio.
Programmable Keys
You can request your dealer to program the following
keys as shortcuts to assignable radio features:
l Mobile radio: P1 key, P2 key, P3 key, P4 key, TK,
P5/Answer key, P6/End key, Up key, and Down key.
l Palm microphone with keypad: TK, P1 key, and P2
key.
l Handset: Same as the mobile radio.
Installation
Instructions
Before installing the radio in a vehicle, read the following
instructions carefully:
l The radio must work with a 13.6V ± 15% negative
ground electrical system only. Ensure to check the
polarity and voltage of the vehicle power supply.
l Check how long the screws will extend from the
bottom surface of the radio. Drill the mounting hole
cautiously to avoid damage to the vehicle wiring and
other parts.
l Connect the antenna and power cord to the radio
before you install the radio in the bracket. Use the
antenna and power cord authorized by the Company
only.
l Install the radio with the mounting bracket supplied by
the Company to avoid radio looseness in case of
accidents. The loose radio may cause bodily injury.
l Install the radio in a location where you can reach the
front panel conveniently.
l Keep sufficient clearance at the back of the radio for
wiring.
l Be sure to use the fuse with the same specification for
the DC power cord upon replacement.
l Ensure that the antenna of the radio must be no less
than 10 meters away from that of other RF devices.
Tools
l Electric drill
l Cross head screwdriver
l T20 torx screwdriver
Parts
NO. Part Name NO. Part Name
1 Mobile Radio 8 Handset
2 Locking Knob 9
Screw (4 mm x
16 mm)
3 Mounting Bracket 10 Handset Hanger
4 Screw (4.8 mm x 20 mm) 11 GPS Antenna
5 Palm Microphone 12
Power Cord (with
2