Quick Reference Guide

1
Product Overview
Product Layout
No. Part Name No. Part Name
1 Side Key 1 (SK1) 13 Microphone
2
Push-to-Talk (PTT)
Key
14 Back/Subgroup Key
3 Side Key 2 (SK2) 15 On-Off/P2/End Key
4 Top Key (TK) 16 Navigation Keys
5 Smart Knob 17 Battery Latch
6 LCD Display 18 Strap Hole 1
7 OK/Menu Key 19 Strap Hole 2
No. Part Name No. Part Name
8 P1/Answer Key 20
Accessory
Connector
9 Numeric Keypad 21 Belt Clip
10 Speaker 22 Battery
11 LED Indicator 23 Charging Piece
12 Antenna / /
Programmable Keys
For enhanced convenience, you can request your dealer to
program the following keys as shortcuts to radio features:
TK, SK1, SK2, P1/Answer key, P2/End key, and
Navigation key. For details, consult your dealer.
Basic Operations
Charging the Battery
CAUTION
●
Use the approved charger to charge the
battery.
●
Read the Safety Information Booklet before
charging.
●
The remaining lithium-ion battery power is
limited to 30% pursuant to the new lithium
battery shipment regulation approved by
the International Air Transport Association
(IATA).
Before initial use, charge either the battery alone or the
battery that is attached to the radio. It is recommended that
the radio remain powered off during charging.
The LED indicator on the charger shows the charging
status, as described in the following table.
LED Indicator Charging Status
Glows red The battery is being charged.
Glows orange
The battery is charged to 90% or
above.
Glows green The battery is fully charged.
Flashes red rapidly The battery fails to be charged.
Flashes red slowly
No battery is placed on the
charger.
Turning On or Off the Radio
To turn on or off the radio, press and hold the On-Off/P2/
End key.
Adjusting the Volume
To increase or decrease the volume, rotate the Smart knob
clockwise or counter-clockwise.
Selecting the Contact or Channel
To select the contact or channel, on the home screen, press
the Smart knob, and then rotate the knob within 5s.
NOTE
If you do not rotate the Smart knob within 5s,
or if you press it again within 5s, you can rotate
it to adjust the volume.
Locking or Unlocking the Keypad
●
Auto Lock
To allow the keypad to be locked automatically, go to
Menu > Settings > Basic Settings > Keypad Lock,
and then enable AutoLock.