Safety Information

4.1.6.2 Trunking Mode
In tru
nking mode, a private call ends in any of the following cases:
 The calling or called party hangs up.
 The call duration exceeds the preset time.
 The BS signal is lost.
 A pre-emptive call or an emergency call occupies the channel.
 The calling or called party changes the contact with the Clear Down feature enabled.
4.2 Call on Analog C
hannel
In conventional m
ode, you can initiate or receive a call on an analog channel with or without signaling.
Call Without Signaling
O
n an analog channel without signaling, you can initiate a call to all the other users on the channel.
To initiate such a call, press and rotate the Smart knob to select the channel, and then press and hold the PTT key.
Call with Signaling
On an
analog channel with signaling, you can initiate a call to a specific contact on the channel.
To initiate such a call, press the preprogrammed Contact key, and then press and hold the PTT key or the
preprogrammed One Touch Call key.