Safety Information

4.1.3.2 Trunking Mode
In trunking mode, a group call ends in any of the following cases:
 The calling party hangs up.
 The call duration exceeds the preset time.
 The BS signal is lost.
 A pre-emptive call or an emergency call occupies the channel.
 The calling party changes the contact with the Clear Down feature enabled.
4.1.4 Initiating a Private Call
4.1.4.1 Through Preset Contact
Press and rotate the Smart knob to select the digital channel or private contact, and then press and hold the PTT key
to initiate a group call.
4.1.4.2 Through One Touch Call
With the One Touch Call feature enabled, press the preprogrammed One Touch Call key to initiate a private call.
In conventional mode, you must press the PTT key after pressing the preprogrammed One Touch Call key.
4.1.5 Receiving a Private Call
4.1.5.1 Conventional Mode
You can receive a private call without any operation.
4.1.5.2 Trunking Mode
The operations vary with the setup mode of the private call.
 FOACSU
When receiving a FOACSU private call, the radio rings and vibrates. Press the PTT key within the preset time
to answer the call.
 Off Air Call Set-Up (OACSU)
The call is established automatically.
4.1.6 Ending a Private Call
4.1.6.1 Conventional Mode
In conventional mode, a private call ends when the call hang time expires.