. Product Overview 1.1 Product Layout No. Part Name No. Part Name 1 Side Key 1 (SK1) 10 Microphone 2 Push-to-Talk (PTT) Key 11 On-Off Key 3 Side Key 2 (SK2) 12 Battery Latch 4 Top Key (TK) 13 Strap Hole 1 5 Smart Knob 14 Strap Hole 2 6 OLED Display 15 Accessory Interface 7 Speaker 16 Belt Clip 8 LED Indicator 17 Battery 9 Antenna 18 Charging Piece 1.
. Basic Operations 2.1 Charging the Battery Use the approved charger to charge the battery. Read the Safety Information Booklet before charging. The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA). Before initial use, charge the battery. You can charge either the standalone battery or the radio with battery attached.
Press the preprogrammed Operation Mode Switch key. If the Zone/Subgroup Switch Mode feature is enabled, you can switch the operation mode by switching the contact through the menu or the Smart knob. Auto Switch The Mode Automatic Switch feature allows the radio to automatically switch the operation mode, so as to guarantee the normal communication of the radios in no-signal coverage areas or when the system fails. Press the preprogrammed Mode Auto Switch key to enable this feature. 2.5.
2.5.2.2 Selecting a Subgroup A subgroup consists of multiple groups or private contacts. To select a subgroup, press the preprogrammed Subgroup Up or Subgroup Down key.
3. Status Indications 3.1 LCD Icons 3.2 LED Indications LED Indicator Radio Status Flashes green The radio is being turned on. Flashes green slowly The radio is standby in trunking mode. Glows green The radio is receiving. Glows red The radio is transmitting. Flashes red The radio is establishing a call in trunking mode. (This indication is applicable only to the calling radio.) Conventional mode: The radio is scanning or roaming. Trunking mode: The radio is hunting.
4. Call Services When you are speaking during a call, keep the microphone about 2.5 cm to 5 cm away from your mouth. This ensures optimal voice quality on the receiving radio. In trunking mode, if the radio is not registered or attached, or an empty group is selected, you cannot initiate a call. 4.1 Call on Digital Channel You can initiate or receive the following types of calls on a digital channel: Group call: a call from an individual user in a group to all the other members in the group.
4.1.3.2 Trunking Mode In trunking mode, a group call ends in any of the following cases: The calling party hangs up. The call duration exceeds the preset time. The BS signal is lost. A pre-emptive call or an emergency call occupies the channel. The calling party changes the contact with the Clear Down feature enabled. 4.1.4 Initiating a Private Call 4.1.4.
4.1.6.2 Trunking Mode In trunking mode, a private call ends in any of the following cases: The calling or called party hangs up. The call duration exceeds the preset time. The BS signal is lost. A pre-emptive call or an emergency call occupies the channel. The calling or called party changes the contact with the Clear Down feature enabled. 4.2 Call on Analog Channel In conventional mode, you can initiate or receive a call on an analog channel with or without signaling.
4.3 Emergency Call The Emergency feature allows you to seek help from your companion or the control center in case of emergency. You can initiate an emergency call with the highest priority even when your radio is transmitting or receiving. This feature is configured and enabled by your dealer.
Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or copied, modified, translated, or distributed in any manner without the prior written consent of the Company. We do not guarantee, for any particular purpose, the accuracy, circuit to that of the receiver's outlet.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications limits: Do not remove the RF Exposure Label from the device. http://www.fcc.gov/oet/rfsafety/rf-faqs.html User awareness instructions should accompany device Compliance with RF Exposure between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive when transferred to other users.
The device has been tested and complies with SAR limits, L'exposition aux champs rf de conformité et de contrôle d'orientations et instructions users can obtain Canadian information on RF exposure and Pour ISEDC Statement compliance Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes avec la distance de l'antenne.
