User's Manual

24
8.1.2 Call Settings
Power Level
You can set the TX power level to high or low.
Go to Call Settings > Power Level, and then select High Power or Low Power.
VOX
The VOX feature allows the voice to trigger transmission. When the voice detected by the microphone reaches the
value to trigger the transmission, the radio automatically transmits the voice without the PTT key pressed.
1. Go to Call Settings > VOX, and then enable the feature.
2. Select External/Internal, and then adjust the microphone transmission sensitivity.
Lower level represents higher sensitivity.
Talker Alias
With the Talker Alias feature enabled by your dealer, go to Call Settings > TalkingAlias, and then enable or
disable Send Alias.
With Send Alias enabled, you can send the radio alias when initiating a call. The called party can view the alias
on the display and identify the calling party.
Talk Around
The Talk Around feature allows you to continue communication in direct mode when the repeater malfunctions or
the radio is out of the coverage of the repeater.
Go to Call Settings > Talk Around, and then enable or disable the feature.
Squelch Level
On an analog channel, the squelch level refers to the squelch threshold required for the speaker of the radio to be
turned on. The higher squelch level requires a stronger signal.
 Go to Call Settings > Squelch, and then select Weak, Normal, or Tight.
 Press the preprogrammed Adjust Squelch Level key to adjust the level.
Compandor
On an analog channel, the Compandor feature allows the radio to compress the voice signal when transmitting and
decompress the voice signal when receiving to improve the voice quality.