User's Manual

20
Option Description Operation
Port path.
b.
Select the USB path option.

Press the preprogrammed
USB Path
Switch
key.
Only Rear
Port
Only the accessory connector can be used as
the USB path.
9.1.3 Set Language
1. On the home screen, go to Menu>Settings> Basic Settings>Language.
2. Toggle the Channel/Navigation key to select the display language.
3. Press the OK/Menu key.
9.1.4 Enable LED Indicator
1. On the home screen, go to Menu>Profiles>Setting>LED.
2. Press the OK/Menu key.
9.1.5 Reset a Radio
On the home screen, go to
Menu
>
Profiles
>
Setting
>
Restore initial value
.
9.2 Call Settings
9.2.1 Set Power Level
You can set the TX power level to high or low.
1. On the home screen, go to Menu>Settings>Call Settings>Power Level.
2. Select High Power or Low Power.
3. Press the OK/Menu key.
9.2.2 Set Talking Alias
On the home screen, go to
Menu
>
Settings
>
Call Settings
>
TalkingAlias
, and then set either of the following:

Send Alias
Send Alias allows you to send the radio alias during a call, so that the called party can identify the calling party by
the alias.
a.
In the
Talking Alias
interface, select
Send Alias
.
b.
Press the
OK/Menu
key.

Auto Add Contacts