User's Manual

16
2. Select an all call contact.
3. Press and hold the PTT key.
Through One Touch Call/Menu
Press the preprogrammed
One Touch Call/Menu
key, and then press and hold the
PTT
key.
6.3.2 Receive an All Call
You can answer an all call without any operation.
6.3.3 End an All Call
An all call ends when the caller releases the
PTT
key.
6.4 Analog Call
An analog call is a call on the analog channel.
Call without Signaling
On an analog channel without signaling, you can initiate acall to all the other users on the channel.
1. On the home screen, toggle the Channel/Navigation keyto select an analog channel.
2. Press and hold the PTT key.
Call with Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel.

Contact your dealer to pre-configure the signalings.

HDC1200 (compatible with MDC1200) and two-tone signalings are available.

The method to make a call with signaling is the same, regardless of signaling types.
1. On the home screen, go to Menu>Contact, or press the preprogrammed Contact Listor Favorite Contact
Listkey.
2. Select a contact.
3. Press and hold the PTTkey or thepreprogrammed One Touch Call/Menu key.