User's Manual

DS-6210VC4 Base Station Owner's Manual Installation
36
Caution:
Handle with care as the COM is heavy.
Figure 3-15 Installing the Combiner Unit
Step 7 Connect all cables as shown in Figure 3-16.
Figure 3-16 Cable Diagram
Step 8 Install the side doors.
1. Align the side door with the frame and firmly press the latch.
2. Fasten the eight screws.
3.7 Installing Cables
3.7.1
Equipment Status
The equipment shall be in the following status before connecting cables:
z The cabinet has been installed.
z All modules have been installed and the power switch is set to OFF.