User's Manual

DS-6210VC4 Base Station Owner's Manual Installation

Figure 3-8 Opening the Cabinet Door

Step 2 Disassemble the side doors as shown in Figure 3-9.

1. Remove the eight screws on the frame.

2. Press down on the two latches and pull out the side door outwards.

Caution:

Care shall be taken to avoid injuries upon pulling out the side door outwards.

Figure 3-9 Disassembling the Side Door

Step 3 Insert the modules into the cartridge (take the BSCU installation for example)

Note:

Make sure the power switch is set to OFF before installing the PSU.

1. Loosen the two ejectors as shown in Figure 3-10.