User's Manual

DS-6210VC4 Base Station Owner's Manual Installation
32
Figure 3-6 Tightening the Bolt
3.6 Installing Modules into the Cabinet
3.6.1
Module Layout
The position of all modules to be installed is shown in Figure 3-7.
Figure 3-7 of Module Layout
3.6.2 Installation Procedures
Step 1 Open the front and back door, as shown in Figure 3-8.
1. Unlock and remove the key in case of the keyhole in a vertical position.
2. Firmly press PUSH until the door knob is bounced.
3. Turn the door knob to the right.
4. Pull the door knob outwards and open the cabinet door.