User's Manual

DS-6210VC4 Base Station Owner's Manual Installation
26
3.3 Installation Preparation
3.3.1
Technical Files
The following table lists the files associated with hardware installation.
File type File Name Description
Network Planning Drawing
Provided by the R&D engineers or technical
sales.
Instructional
file for
installation
Site Survey Report
It is filled by the investigation engineer on
site.
DS-6210VC4 PDT Trunking System
DS-6210VC4 PDT Trunking Base
Station Hardware Description Manual
Manuals
DS-6210VC4 PDT Trunking Base
Station Service Manual
Shipped with the equipment
Other files Packing List Shipped with the equipment
Table 3-1 Technical Files
3.3.2 Personnel
Only the adequately trained personnel with satisfactory knowledge of the system can carry out the
installation and tuning. The number of installation persons is subject to engineering progress and
environment.
3.3.3 Tools
The following tools and meter are required before installation.
General
Tools
Claw hammer, slot type screwdriver, large Phillips screwdriver, wrench, paper knife,
connector board and A type ladder.
Special
Tools
ESD-preventive wrist strap, cable peeler and crimping pliers.
Meter
Multimeter
Table 3-2 Tools and Meter