User's Manual

31
HYPRO WATER – 09.2020
31
10. Annex
10.3 NSF/ANSI
Tested and certified by NSF International
against NSF/ANSI Standards 42, 53 and 401
for the reduction of claims specified on
the Performance Data Sheet.
Compounds certified under NSF/ANSI 401
are incidental contaminants that have been
detected in drinking water supplies at trace
levels. These compounds can affect the
public perception of drinking water quality.
This Class B system or component
conforms to NSF/ANSI 55 for the
supplemental bactericidal treatment
disinfected public drinking water or other
drinking water that has been tested
and deemed acceptable for human
consumption by the state or local health
agency having jurisdiction. The system
is only designed to reduce normally
occurring nonpathogenic nuisance
microorganisms. Class B systems are not
intended for treatment of contaminated
water.
y Refer to the NSF performance
data for details on which individual
contaminants to remove.
➡ “10.7 NSF performance data”
(page36).
10.1 Contact details for customer service
If you have any questions or comments:
Internet: www.hytecon.com
Address: HYTECON Produktion
and Vertrieb GmbH
Oststraße 68
32051 Herford
Germany
Email: [e-mail]
Telephone: [phone] - 0
10.2 Data protection
Our data protection policy can be found
at:
www.hytecon.com