User's Manual

29
HYPRO WATER – 09.2020
29
8. Disassembly
Disassembly of the device after its service
life:
y Disconnect the mains plug from the
socket.
y Collect the escaped water in a bucket.
y Turn off the angle valve on the cold
water line.
y Turn the shut-off valve in the “CLOSE”
direction
y Open the drinking water tap until no
further water runs out.
y Close the drinking water tap.
y Draw out the reducer piece.
y Unscrew the connection piece (water
tap) from the drinking water tap.
y Unscrew the knurled screw below the
wall bracket.
y Remove the device.
y Disassemble the wall bracket.