User's Manual

HYPRO WATER – 09.2020
26
6.1 / 2
y Draw the used filter out of the device
at the handle and pick up any escaped
water.
y Remove the protective film from the
new filter.
y Insert the new filter.
y During insertion, carefully press the
filter down until it latches into the
device.
➡ “3.4 / 21” (page19).
y Screw the screw cap for the filter
chamber shut.
➡ “3.4 / 22” (page20).
y Turn the shut-off valve in the “OPEN”
direction.
➡ “3.5 / 3” (page21).
y Fit the device cover.
➡ “3.5 / 4” (page21).
y Turn on the drinking water faucet
and let the water run for at least
60seconds, until no more particles are
coming out.
➡ “3.5 / 5” (page22).
6.2 Checks
y Make sure no water can penetrate at
the power cable or power source.