User's Manual

25
HYPRO WATER – 09.2020
25
6.1 Changing the filter
For the device to work optimally, the filter
must be changed as soon as the following
criteria are met:
y Flow quantity of 2000 liters reached.
y Operating period of 4 months reached.
When the filter needs changing, the LED
flashes red. When the HYPRO app is used,
the user also receives notification when it is
time to replace the filter.
y Remove the device cover.
➡ “3.4 / 18” (page19).
y Turn the shut-off valve in the “CLOSE”
direction. Never unscrew the screw cap
for the filter chamber under pressure.
➡ “3.4 / 19” (page19).
6.1 / 1
y Open the drinking water tap until no
further water runs out of the water tap.
y Close the drinking water tap again to
prevent a backflow of water.
D ATTENTION!
Water escaping!
Water can escape when the screw cap
is opened and the filter is removed. The
escaping water can cause material damage.
y Wipe up and collect any escaped water
immediately.
y Unscrew the screw cap for the filter
chamber.
➡ “3.4 / 20” (page19).
6. Maintenance