User's Manual

15
HYPRO WATER – 09.2020
15
3.4 / 5
y Select a suitable position for the wall
bracket.
➡ “3.1 Requirements applicable to the
installation site” (page11).
y Straighten the wall bracket using the
spirit level.
y Mark the four fastening points.
The screws included in the scope of
delivery are intended for mounting on
chipboard.
When mounting on a wall, suitable
fasteners must be selected.
D WARNING!
Danger of explosion or electric shock!
Drilling into gas, water or electrical lines
can result in dangerous situations.
y Make sure no lines are inside the wall
at the fastening points.
3.4 / 6
y Screw the wall bracket on with the four
small screws.