User's Manual

HYPRO WATER – 09.2020
14
3.4 / 2
y Shut off the angle valve on the cold
water line.
3.4 / 3
y Position a bucket beneath the angle
valve on the cold water line.
y Unscrew the cold water connection to
the water tap from the angle valve.
D ATTENTION!
Danger of damage due to incorrect
handling!
The device and the environment can be
damaged if a torque of 3 Nm is exceeded
when screwing on the connections.
y Tighten the connections with a
maximum torque of 3 Nm.
3.4 / 4
y Screw the T-piece onto the angle valve
on the cold water line.
y Screw the opposite side of the T-piece
onto the cold water connection of the
water tap.
y Make sure that the T-piece valve is
closed.
y Remove the bucket.