User's Manual

- 17 -
5.2.6 View Results
The measurement results of this device can be viewed in the mobile application "HYPNOS" APP "Data",
including the data of sleep quality, nighttime symptoms, early morning movement symptoms, etc. by date.
Caution
If the corresponding measurement results cannot be viewed, it may be due to the
following reasons.
1
After the measurement cycle is completed, no data is uploaded or the uploaded data
is incomplete due to lack of wireless network connection or other reasons.
2
Leave the equipment while monitoring.
5.2.7 Cleaning equipment
Please take the A side pad to wash separately, you can use the washing machine to wash.
Side B is not washable, but can be wiped with a cloth dampened with water.
6 Maintenance and Care
 The B side of the equipment should not be immersed in water, please wipe it with a cloth with water.

Turn off the equipment before disassembling it.
 Do not place or store this equipment near an open flame or heat source.

This equipment contains motors and precision devices, long-term magnetic field interference will
reduce product performance and affect service life.

Avoid
dropping or impacting
this equipment during use or storage.
 Do not fold the device or use sharp objects to press the device.

This device is used for sleep detection and early morning motion detection, both in bed.
7 Troubleshooting
Fault Type
Possible causes and treatment methods
Failed to bind the mobile
application
1 Insufficient signal strength of cellular or wireless networks for
mobile terminals
Please move to a location with a stronger signal and try again.
2 The device has been tied by another user
Please call customer service for a solution.