Installation Manual

5) Press the memory into the socket until the tabs snap into place and secure the memory
module.
6) Replace the computer cover and plug in the AC power cord.
Notebook SO-DIMM Installation
Note: Never apply pressure or handle the memory module on or around the Integrated Circuit
(IC)! Always handle the memory with both hands positioned at the upper-most corners of the
Printed Circuit Board (PCB).
1) Disconnect the AC power cord and remove the battery.
2) Prior to handling the memory module(s), always touch an unpainted and grounded metal
object or use a grounded antistatic wrist strap to prevent electrostatic discharge (ESD).