HyperX Cloud Revolver S Headset Part Numbers: HX-HSCRS-GM/AS HX-HSCRS-GM/EE HX-HSCRS-GM/EM HX-HSCRS-GM/LA HX-HSCRS-GM/NA Document No. 480HX-HSCRS001.
TABLE OF CONTENTS Introduction ..............................................................................................................................3 What’s included ........................................................................................................................3 Features ...................................................................................................................................4 Technical Specifications.................................................
Introduction HyperX™ Cloud Revolver S is primed for action with Plug N Play virtual Dolby® Surround 7.1 audio — no software required. Hear every footstep, explosion and gunshot with cinematic clarity as the simulated seven positional speakers provide precise sound with distance and depth. The advanced USB DSP sound card handles everything, delivering consistent premium-quality sound, no matter what system you’re playing on.
Features • Plug N Play Dolby® Surround 7.1 audio technology • Advanced USB Audio Control Box with DSP Sound Card • Studio grade sound stage • Signature HyperX memory foam • Wide Headband for Maximum Comfort Technical Specifications Headphone • Driver: Dynamic, 50mm with neodymium magnets • Type: Circumaural, Closed back • Frequency Response: 12Hz–28,000 Hz • Impedance: 30 Ω • Sound pressure level: 100.5dBSPL/mW at 1kHz • T.H.D.
Overview A. Durable Steel Frame B. Suspension headband C. Detachable noise cancellation mic D. Attached cable w/ 4 pole 3.5mm plug E. USB Audio control box Document No. 480HX-HSCRS001.
USB Audio Control Box operation The USB Audio Control Box has the following features: • • • • • Dolby® Surround 7.1 audio technology 3 preset equalizer modes Microphone Mute Headphone volume adjustment Microphone volume adjustment Vocals EQ LED Flat EQ LED Bass Boost EQ LED Headphone Volume Equalizer Button Press to cycle through EQ modes Dolby® Surround 7.
Usage with USB Audio Control Box (PC/Mac) To use the headset to your computer, connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB Audio Control Box, then plug the USB cable into your computer. Using with USB Audio Control Box Document No. 480HX-HSCRS001.
Configuration with USB Audio Control Box (Windows) For optimal surround sound performance configure Windows using the steps below. 1. Right-click the speaker icon in the task tray and select ‘Playback Devices’. 2. Right-click on ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’. Document No. 480HX-HSCRS001.
3. With ‘HyperX Cloud Revolver S’ selected click on the ‘Configure’ button. 4. In the ‘Audio channels’ list select 7.1 Surround and click on ‘Next’. 5. In the ‘Optional speakers’ list make sure all boxes are checked then click ‘Next’. 6. In the ‘Full-range speakers’ list make sure all boxes are checked then click ‘Next’. 7. Click ‘Finish’ to save the settings. Document No. 480HX-HSCRS001.
8. Click on the ‘Recording’ tab, then right-click ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’. Your HyperX Cloud Revolver S is now ready to use. Document No. 480HX-HSCRS001.
Configuration with USB Audio Control Box (Mac) For optimal surround sound performance configure Mac using the steps below. 1. Click the Apple menu, then select ‘System Preferences’. 2. In ‘System Preferences’ click on ‘Sound’. Document No. 480HX-HSCRS001.
3. Select output then select ‘HyperX Cloud Revolver S’. 4. Select input then select ‘HyperX Cloud Revolver S’. Document No. 480HX-HSCRS001.
5. Open Finder then select Applications > Utilities > Audio MIDI Setup. 6. Select ‘HyperX Cloud Revolver S’ then select Output. 7. Click the ‘Format’ drop down and select ‘8 ch 16-bit Integer 44.1 kHz’. 8. Click ‘Configure Speakers’. Document No. 480HX-HSCRS001.
9. Click the ‘Configuration’ drop down and select 7.1 Surround. 10. Click Apply. Your HyperX Cloud Revolver S is now ready to use. Document No. 480HX-HSCRS001.
Usage (Xbox One™ & Xbox One S™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller *Headset If your Xbox One controller does not have a 3.5mm jack you will need the Xbox One Stereo adapter (sold separately) that plugs into the Xbox One controller (pictured below.) ™ ™ ™ * Using with Xbox One Document No. 480HX-HSCRS001.
Usage (PS4™ & PS4™ Pro) with USB Audio Control Box To use the headset with PlayStation™ 4 (PS4™), connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB audio control box, then plug the USB cable to the PS4™ USB port. Once the ‘HyperX Cloud Revolver S’ device is detected configure the PS4™ Audio Devices using the steps below: 1. Turn on your PS4 ™ game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4.
Usage (PS4™ & PS4™ Pro) with direct 3.5mm connection To use the headset with PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: 1. Turn on your PS4 ™ game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4. Scroll down to ‘Audio Devices’ and select it. 5. Choose ‘Output to Headphones’ and select ‘All Audio.’ Using with PS4 Document No. 480HX-HSCRS001.
Usage (Wii U™) To use the headset with Wii U™, connect the 3.5mm plug on the headset directly to the Wii U™ gamepad controller. Using with Wii U Document No. 480HX-HSCRS001.
Usage (Mobile Device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device. Using with mobile device (phone, tablet or notebook) Document No. 480HX-HSCRS001.
