Users Manual

13 | Page
Machine Installation
Step 1
- Connect the base unit wire connector (H) to the lower
post wire connector (G).
- Install post (A) onto the base unit (B).
- Fasten the post (A) to base unit (B) using the wrench
(I), with bolts (D&E).
Step 2
- Connect the control panel wire connector (K) to the
upper post wire connector (J).
- Align the control panel (C) to the post (A), and fasten
it using the wrench (I), with bolts (E)
Parts List
- Post
- Base Unit
- Control Panel
- Bolts M10x20 [10]
- Wrench