Specifications

Table Of Contents

bte Specification

This specification are subject to be changed without notice.

8/27/2019 V1.0

Manual.

BEING TECH ELECTRONICS CORP.

Office:

6F.-1, No.371, Sec. 1, Guangfu Rd.,

Hsinchu City, Taiwan

Tel: +886-3-6660126

Fax: +886-3-6660106

PAGE 1
bte Specification Manual. BEING TECH ELECTRONICS CORP. Office: 6F.-1, No.371, Sec. 1, Guangfu Rd., Hsinchu City, Taiwan Tel: +886-3-6660126 Fax: +886-3-6660106 This specification are subject to be changed without notice. 8/27/2019 V1.
PAGE 2
首崴電子股份有限公司 BEING TECH ELECTRONICS CORP. 6F.-1, No.371, Sec. 1, Guangfu Rd., Hsinchu City, Taiwan 30074 TEL: 886-3-6660126 FAX: 886-3-6660106 C、Specification： Status LED RF LED Start stick SYNC 1.Press & hold SYNC for 2 seconds to enter pairing mode. RF LED will start to fast flash. 2. Press Up/Down/Left/Right/Start/A/B/Z/L/R/C-up/C-down/C-left/C-right keys will turn on the controller and enter to link mode, RF LED will start to low flash. 3. Stick is analog output only used in the game. 4.
PAGE 3
首崴電子股份有限公司 BEING TECH ELECTRONICS CORP. 6F.-1, No.371, Sec. 1, Guangfu Rd., Hsinchu City, Taiwan 30074 TEL: 886-3-6660126 FAX: 886-3-6660106 D、Bluetooth Related Specification Wireless Bluetooth v2.0 Class 2 Data Rate Bluetooth v2.0 (1Mbps) Bandwidth 2.402GHz ~ 2.480GHz RF output power Sensitive Bluetooth class 2 (up to +2dBm) Meet FCC and R&TTE down to -81dBm Spread Spectrum Frequency Hopping Spread Spectrum (FHSS) Modulation Method GFSK Operation Range Up to 10M (open space) Storage Temp.