Data Sheet
The Vengeance uses four different motors and ESC's. Sometime there might be a inconsistent distrubtion of
power among your Vengeance which could lead to poor ight performanc and handling. To reset your ESC
and tune them properly please follow the below steps:
1. Remove ALL propellers before conguration! Failure to
do so may lead to bodily harm.
2. Connect the Flight Controller to CleanFlight without the
main ight battery connected.
3. Turn the motor "Test Switch On"
4. Move the "Master" switch to the maximum level
5. Connect the main flight battery to the Vengeance.
Wait ve seconds after the ESC makes a gradual rise in
noise
6. Move the "Master" switch to the minium level, you will
hear a gradual decline in ESC sound.
7. Turn OFF the Master Switch and unplug the ight battery.
"Adjustments" Configuration
Page: Here is where you can
set advanced features on the
Vengeance via AUX channels on
your Transmitter.
It is important to understand all the
functions that you enable. Check
your AUX channel's by looking at
the "Channel Map" configuration
page.
Motor Configuration Page: This
page is used to adjust your motor
settings if you wish to do so, though
the Vengeance becomes already
pre-configured. Before testing this
feature make sure to remove ALL
propellers before trying. Failure to
do so may result in bodily harm.
How to congure your ESC adjustments:
3
4
6