Installation Guide

PAGE 1
Ill LED WALL PACK FIXTURE HYPERION. INSTALLATION GUIDE a WARNING RISK OF ELECTRIC SHOCK DISCONNECT MAIN POWER AT FUSE OR C CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE @ safety INSTRUCTIONS 1. Read instructions carefully before attempting to install the fixture 2. Disconnect power before installing or servicing 3. This light must be wired in accordance with the local codes and ordinances 1.
PAGE 2
LED WALL PACK FIXTURE HYPERION. INSTALLATION GUIDE Connect the quick connect terminal, then screw the fixture with bolthole piste & When the lamp is installed, please remove the pig at the drain hole m INSTALLATION INSTRUCTIONS 1 1. Take out the light and 'loosen the screws on the cover then take apart the fixture with a screwdriver Pull off the quick connect terminal (step 1 from isolationist Instructions 1) 2.