Corporation Network Router User Manual

IN-tact 1101 Software Configuration Guide 79

Host Processor Setup - Minimal with Single Host

This is an example of a single host processor configuration for a fictional processor, i.e., Acme

Processing. There are three screens involved with configuring a host processor (Figs. 1, 2, & 3).

Figure 1. Host Port Settings Screen - Single Host

By restricting the table to a single host processor entry, the end-user terminals are expected to

send all POS transactions to a single destination. At lease one host processor must be defined.

Field/Button Description

NII The use of the NII value allows those terminals initialized with the

same NII to be matched for transmission of all traffic to the associated

primary IP address

Description A free-form text entry used to identify the processor

Enabled Allows you to temporarily disable, but not delete, a processor

Connection Type Defines whether a Standard or HTTP connection is being used by the

processor

Edit Displays the related connection type screen (See Figure 2) and

allows you to define addresses